The Spa Shoppe

PoolBoss pH UP can be broadcast directly on the pool surface and is readily soluble to allow immediate pool use.  pH UP is an essential part of pool maintenance, using the active ingredient sodium carbonate to raise lo pH levels.  Low pH levels indicate acidic water which causes eye and skin irritation and can damage pool equipment.

Maintenance of propr pH levels also helps maintain chlorine effectiveness in killing bacteria.  PoolBoss pH UP comes with easy-to-follow instructions on dosages required to maintain proper pH levels.

Create an instant umbrella to protect chlorine from sun damage by applying PoolBoss Pool Water Stabilizer at the start of the season or when a pool is freshly filled.  After conditioning, add PoolBoss Chlorine Concentrate as directed.

Stabilizer is not required with bromine sanitizers.

When the pH level of a swimming pool water is too high, the water is alkaline and chlorine is unable to do its job. 

Simply disolve PoolBoos pH Down Dry Acid in water in a plastic bucket, and pour slowly into pool water while walking around the pool to restore pH levels to the normal range of 7.2 to 7.6 pH Down will also lower the total alkalinity.

Alka-Plus stabilizes pH to help the chlorine in pool water work more efficiently.  Alka-Plus raises the total alkalinity of pool water to prevent corrosion that can be caused by low total alkalinity.

When testing indicates low alkalinity, simply broadcast Alka-Plus over the water according to the instructions on the product label.  Alka-Plus contains sodium bicarbonate to bring pH levels up to 80-150 ppm.

Cal-Plus provides an easy and effective way to raise the calcium hardness of swimming pool water, preventing corrosion of metal equipment and etching of plaster.

Ca-Plus is completely soluble and it is safe to swim immediately after application.  Cal-Plus contains calcium chloride.

PoolBoss Algaecide is effective against green algae and blue-green algae.  To maintain clear water, add one gallon of product for each 50,000 gallons of water in freshly filled pools.

Increase use to one gallon per 20,000 gallons when algae is visible.  Pool may be used about 15 minutes after treatment.